Supply of Flat Brushes for Paints and Varnishes for Heavy Duty as per
IS 384 (Part 1) (Q3) , Thinner For Epoxy Paints (BHEL) (Q3) ,
Enamel, Synthetic, Exterior (A) Under Coating (B) Finishing
Paint (V3) Confirming to IS 2932 (Q3) , Plywood IS 303 BWR
of size 8 ft by 4 ft by 8mm , Plywood IS 303 BWR grade of
size 7 ft by 3 ft by 12mm 7 ply , Mirror for table dressing
gents 5 point 5 mm thick size 366mm by 1820 mm , Foam 7
ft by 6 ft by 4 inch 40 density , Plywood BWR 2400 mm by
1200 mm by 12 mm , Well seasoned 2nd class Hard Wood
scantling of Size 90mm by 35mm by 2000mm , Plywood one
side teak face BWR grade of size 8 ft by 4 ft by 4 mm ,
Plywood IS 303 BWR grade of size 8 ft by 4 ft by 18 or 19
mm , Foam Cushion 100MM thick size 53 by 50cm 40
density covered with tapestry cloth , Wood Screw 15 mm ,
Hard wood well seasoned 10 Feet by 3 inch by 2 inch , Pre
laminated MDF Board with one side teak face of size 8 ft by
4 ft by 18mm , Tapping Screw Type C 32 mm , Particle
Board pre laminated with one teak face 8 ft by 4ft by 18 or
19mm , Cloth tapestry 48 inch wide 600 gsm , Cane plastic
2mm , Varnish , Block board 8 ft by 4 ft by 9mm , Wood
Screw 65 mm , Cane plastic 4mm , Hydraulic base for chair
, Elbow GI 3 way 32mm , Beading teak wood half round
9mm thick by 18 or 19mm wide 7 ft long , Wood Screw MS
25mm , Fevicol SH , Continuous Piano Hinges 18mm by 1
point 8mtr , Newar Nylon 50 or 55mm wide , MS Angle iron
of size 100 by 100 by 5mm , Wood screw MS 50 mm , Lock
for Almirah 6 lever , Shellac Chash , Screw nut and bolt MS
complete set 75mm for charpoy , Nails wire 80mm , Seat for
chair steel wo arms , Nails wire 100mm , PVC shoes for
chair verandah , Handle for almirah med 100mm steel ,
Wood Screw MS 20 mm , MS pins 20 mm , French polish ,
Tapestry cloth cover only for cushion 530 by 500 by 100mm
with Zip , Nut bolt 6mm by 75mm 100 Nos in a pkt ,
Hexagon Nut 32mm , Caster wheel for revolving chair ,
Wood Screw 40mm , Nails of size 2 point 5 inch , Lock small
for almirah , Nails wire 20mm , MS Screw wood 75mm by
10mm , Turkey umber powder , Nails Iron 1 inch , Grinder
paper , MS panel pin , Raw sienna powder Yellow Powder ,
Emery paper No 80 , Nails of size 2 inch , Hard Wood 2nd
class well seasoned beading of size 6mm thick 20mm wide
and 7ft long , Nails of size 1 point 5 inch , Plywood BWR 8 ft
by 4 ft by 6mm thick , Chass , Foam 6mm thick of size 6 ft
by 3 ft , Seat and back for chair for CB Steel , Wheel base for
chair computer revolving complete with 5 nos wheel ,
Sunmika 2400 mm by 1200 mm by 1mm , Wooden beading
of 20mm thick , Handle arm rest for chair visitor , PVC
shoes sqaure type , Wooden arm rest for chair CB steel ,
Handle arm rest for chair computer revolving , Turpentine
Oil , PVC shoes round type heavy type , Stainless steel
wood screw 10 by 7 , Hydraulic with cast base frame chair
revolving 120mm , Fevicol Type B 1000 grams paper
adhesive or Liquid gum , Sand paper No 100
