alloy steel chain Tenders | Latest Tenders for alloy steel chain

Supply of Double Legged Alloy Steel Chain Suitable For 15T Capacity Eot Crane As Pe R The Enclosed Specification. Warranty Period: 12 Months After The Date Of Delivery

Supply of Circular Lifting Magnet For Lifting Cold As Well As Hot Material Up To 600Deg C In Foundry Environment . Deep Field Coil Design, Copper Wound For 220V Dc Operation, Must Include 03 Leg Chain And Bail Assembly, Ext Ernal Electrical Connectors And Surge Suppressor, Heavy Duty Cast Magnet Designed For Severe Scrap Handling D Uty Similar To Ohio Make Model 66Dcwx, Confirming To The Following Specification For Single Magnet Characteri Stics- 1. Cold Current - 105 Amps Max. 2. Cold Power- 18.5 Kw 3. Self-Weight Should Not Be More Than 5Ton In Clusive Of Chain, Bail And Other Accessories 4. Duty Cycle: Min. 50%, 24 Hrs./ Day 7 Days/ Week, To Allow Extra Ha Ndling Time Of Hot Materials At 10Minutes Lift Cycle 5. Diameter Of Magnet: 66Inches -1 Inch +3Inch 1650Mm -25. 5Mm/+50Mm 6. Lifting Capacities Shall Not Be Less Than A Pig Iron: H M S - 5200 Lbs. 2359Kgs B Broken/Cu T Scrap: 2700 - 3300 Lbs. 1225-1497Kgs C Steel Turnings: 1700 Lbs. 771Kgs Note: The Tolerance In Lifting C Apacity Must Be +/-25% Of The Above Mentioned Ranges At All Operating Conditions. 7. Magnet Conductor Shall Be Of Premium Electrical Grade Copper With 99.99% Purity With Class H Insulation For Maximum Coil Life Under Severe Operation. 8. Magnet Shall Be Of High Grade Cast Steel Welded Construction For Strength And Waterproof. 9. Heavy Duty, Nonmagnetic Bottom Plate & Sealing Plate, Made Of Wear Resistant & Work Hardened Manganese Steel Shall Be Used To Protect The Coil From Damage Caused By Impact Including Bumping Plate. 10. Additional Protection From Moisture & Impact Is To Be Provided To The Coil With The Use Of Non-Magnetic Manganese Sealing Plate.11. Heavy Duty, Annealed Alloy Steel 3-Legged Chain With A Master Hook Bail Is To Be Provided.12. Suspension Lugs Should Be Heavy-Duty & Pins Shall Be Provided To Connect The Chain To The Magnet. 13. Suitable Rating Surge Suppresser Me Tro Cell Shall Be Introduced In The Magnet. 14. Electrical Connectors: - Plug-In Type Connectors Made From A Size Of 25 Sq. Mm 2 - Conductor Type W Magnet Cable, 2000V Dc Rated For Durability And Ease Of Replacement. 15. E Xternal Connectors To Be Clamped And Protected With A Shield. 16. 08 Hrs. Heat Rise To Be Performed To Verify Mag Net Integrity. Temperature Rise Test, High Voltage Test And Insulation Resistance Test Should Be Performed And Reco Rded For Traceability And Future Reference. Note: 1. Magnet Must Be Same Or Similar In All Respects To The 66 Inch 1676 Mm Dcwx Model, Ohio Make Magnets. 2. All Relevant Tests And Test Certificates Shall Be Submitted Alon G With The Supply. 3. The Manufacturer Shall Carry Out Continuous Load Test. 4. Warranty: 24 Month From The Date Of Commissioning And Proving Out Of M&P. 5. Stage Inspection By Tpi Before Closing The Magnet And Inspection R Eport To Be Submitted By The Firm To Rwp/Bela With The Supply. 6. Tenderer Shall Indicate The Service Support Avail Ability. Stage Inspection By Tpi Before Closing The Magnet As 100% Of Po Qty. Warranty Period: 24 Months After The Date Of Delivery

Supply of 2 Heavy Duty Alloy Steel 3 Legged Chain For Electromagnet As Per Is -2760-1980Gr-80 . Main Oblong Ri Q3

Supply of Four Leg Alloy Steel Chain Sling, Diameter 16Mm With Master Link On Top Di A45 Mmx250mmx125mm, Intermediate Link 25Mmx120mmx60mm, Joining Link 18Mmx80mmx40 Mm And Eye Hook At Bottom With Safety Latch Swl 8 Ton, Hook Is:3822, Hook Jaw Openi Ng 52Mm, Effective Lenght 5 Mtr, Grade 80, Chain Sling Is:2760 Swl16.8 Ton With Manufa Cturing Test Certificate Endorsed By Competent Personapproved By State/Central Govt./Authority With Copy Of Validation Of Competency. Warranty Period: 30 Months After The Date Of Delivery

Supply of Two Legged Chain Sling Alloy Steel, Grade 80, With One End Oval Ring And Other End Eya Hook, C Hain Dia -28 Mm, Capacity Of Sling Is 44 Ton On As Per Drawing No-Rygd/Oeic/2024/25 Material Will Be Supplie D With Govt. Approval Load Test Certificate, Accepted Make Is Oeic. Warranty Period: 30 Months After The Dat E Of Delivery Single Legged Chain Sling Alloy Steel Gr.80, With One End O Ring And Other End Eye Hook, Chain Dia 16 Mm, Capacity Of Sling Is 8 Ton As Per Drawing No-Rygd/Oeic/2024/26 Material Will Be Supplied With Govt. A Pproval Load Test Certificate, Accepted Make Is Oeic Warranty Period: 30 Months After The Date Of Delivery

Supply Of Store For The Use Of Parnashala Extraction Camp, 65 Steel Alloy Moulded Linked Chain Chain For Power Chain Saw Model No Ms 660 30 Inch Round File Half Round File

Supply of Two Leg Alloy Steel Chain Slings Gr.80, Chain Sling Capacity 4.48T, Chain Dia.10Mm As Per Is:2760 Having O-Ring At Top Size 25 Mm And Id .160Mm Of Gr.80, Effective Length 3Mtr, Hook At Bottom As Per Is: 3822, Hook Throat Openingg1 40Mm, L 140Mm, Hook Eye Inside Dia. E 20 Mm, Hook Wll 3.2T With Safety Latched Fitted With Manufacturing Test Certificate And Competent Person Test Certificate Approved By Central/State Govt. With Validation Of Competency. Warranty Period: 30 Months After The Date Of Delivery

Supply of Steel Chain Sling, Material - Alloy Steel Grade - 80 With Length Of Chain - 1650 Mm, Chain Links Rods Diameter Thickness - 20 Mm, Chain Links Diameter - 100 Mm, Round Ring At Both Ends Ring Diameter - 150 Mm, Round Ring At Both End Rings Rods Diameter Thickness - 50 Mm, Chains 08 Nos. 01 Sets Capacity 16 Tons Swl With Load Testing Certificate From Nabl Approve Laboratory. Warranty Period: 30 Months After The Date Of Delivery

Supply of Chain Pulley Block 02 Tonne Capacity X 3 Mtrs Lift Isi Marked With Grade 80 Alloy Steel Load Chain . Warranty Period: 30 Months After The Date Of Delivery

Supply of Chain Pulley Block 01 Tonne Capacity X 3 Mtrs Lift Isi Marked With Grade 80 Alloy Steel Load Chain . Warranty Period: 30 Months After The Date Of Delivery