Aluminium Chequered Sheet Tenders | Latest Tenders for Aluminium Chequered Sheet

Supply Of Gi Pipe 0.5 Inches, Ms Flat Bar 20 X 6 Mm, Ms Angle 40 X 40 X 3 Mm, Ms Angle 50 X 50 X 6 Mm, Aluminium Chequered Plate 04 Mm, Aluminium Sheet 03 Mm, Gi Sheet 01 Mm, Ms Sheet 06 Mm, Ms Sheet 04 Mm, Ms Sheet 02 Mm, Buffing Wheel 4 Mm, Cutting Wheel 2 Mm, Wooden Beeding Flat 25X06 Mm, Wooden Beeding Corner 1 Inches, Beeding Wooden Flat 0.5 X 04, Magnetic Stopper For Door, Gasket Hard 02X02 Mtr, Gasket Rubber 02X02 Mtrs, Gi Pipe 2 Inches, Gi Pipe 1 Inches, Concrete Drill Bit 5Mm To 13 Mm, Drill Bit 1 To 10 Mm, Marine Ply Wood 08 Ft X 04Ft X 14 Mm, Bolt Nut Ss Full Thread With Washer M 16X6 Inches, Bolt Nut Ss Full Thread With Washer M 10X3 Inches, Bolt Nut Ss Full Thread With Washer M 10X2.5 Inches, Underwater Repairing Putty, O Ring Kit Inches, O Ring Kit Mm, Battery For Multimeter, Curtain Rod Centre Clip Bracket 0.75 Inch, 1 Inch, Washbasin Flexible Hose 0.5 Inches, Sunmica White 0.8Mm X 08Ft X 04Ft, Sunmica Teak Wood Grains 0.8Mm X 08Ft X 04Ft, Revit Flat Ms 02X05 Mm, D Shackle 10 X35x15 Mm, D Shackle 8X35x20 Mm, Curtain Rod Ss 0.75 X 06 Mtrs, Chain Ss 4 Mm, Marine Plywood 08 Ft X 04Ft X 10 Mm, Gi Pipe Repairing Putty, Voltmeter 0-300 V, Heater 500 W 240V, Gland Packing Asbestos Rope 8 Mm, Copper Tube 8Mm, Copper Tube 06 Mm, Wire Rope Ss 3 Mm, Wire Mesh Ss 12X12 Mm, Wire Gi 04 Mm, Washbasin Waist Coupling, Aluminium Flat Bar 25X2mm, Hinges Ss 4 Inch X 1 Inch, Hinges Ss 0.5 Inch X 3 Inch, Hinges Ss 0.75 Inch X 3 Inch, Hinges Kuff Centre, Hinges Kuff Inner, Hinges Kuff Side, Hydro Meter, Halogen Lamp Fitting, Fiber Glass Tape, Self Drilling Screw 2 Inch, Self Drilling Screw 1 Inch, Chopsaw Cutting Wheel 14 Inch, Pop Rivet 1 Inch X 0.5 Inch, Pop Rivet 1 Inch, Aluminium Flat Bar 40X04 Mm, Aluminium Flat Bar 25X4mm

Supply of Aluminium Chequered Sheet 2.03 X 813 X 2960 Mm, Designation 65032 T6, Five Bar Pattern Iv As Per Is: 14712-99, Fig-1, Conforming To Rdso Specification No C: 8217 Rev-02. Warranty Period: 30 Months After The Date Of Delivery

Supply of Aluminium Chequered Sheet, Size : 3360 Mm X 813 Mm X 2.03 Mm, To Rdsos Str No. C - 8217 Rev. -2 Of September 2013. Warranty Period: 30 Months After The Date Of Delivery

Supply of Aluminium Chequered Sheet, Size : 3360 Mm X 813 Mm X 2.03 Mm, As Per Rdso Str No. C - 8 217 Rev. - I. Warranty Period: 30 Months After The Date Of Delivery

Supply of Aluminium Chequered Sheet Size 2774 X 825 X 2.03 Mm New Size To Is:737/2008, Designation 65032, Condition-T6 And Rdso Specn. No.C8217 Rev.-2 ..

Supply of Aluminium Chequered Sheet.

Supply of Aluminium Chequered Sheet Of Size 2.03Mmx1250mmx3000mm Height Of Ridge S Not Included As Per Rdso Spec C-8217 Revision 2, Single Bar Pattern As Per Is:14712-99, Fi G-1Ii. Warranty Period: 30 Months After The Date Of Delivery

Supply of Aluminium Chequered/Tread Sheet To Size Aluminium Chequered/Tread Sheet To Size 2.03 X813 X 3360 Mm With Five Bar Pattern To Is:14712/99, Amendment No.1 Of Mar. 07, Designation-65032 To Temper Condition - T6, Duly Satisfying The Bend Test To T6 Condition As Per Drg.No. - Specn: Is:14712/99, Amendment No.1 Of Mar. 07, Designation-65032 To Temper Condition - T6, Duly.

Supply of Aluminium Chequered Sheet, Size 3048 Mm X 880 Mm X 2.03Mm With Single Bar Or Five Bar Pattern To Rdso Spec. No. C-8217 Rev.2 For Emu Coaches. Warranty Period: 30 Months After The Date Of Delivery

Supply of Aluminium Chequered/Tread Sheet To Size 2.03 X813 X 3360 Mm With Five Bar Pattern To Is:14712/99, Amendment No.1 Of Mar.07, Designation-65032 To Temper Condition - T6, Duly Satisfying The Bend Test To T6 Condition And Conforming To Rdso Spec No. C-8217 Rev2 Warranty Period: 30 Months After The Date Of Delivery