Abutment Tenders | Latest Tenders for Abutment

The Work Of Rcc Jacketing Of Pier, Abutment, Changing Of Fc Slab Of Span 1&3 Of Ballast Wall, Strenghening Work Etc. Of Br.No. 38 In Malda -New Farakka Section Of Malda Division Under The Jurisdiction Of Sr.Divisional Engineer-I/Malda.

Ctrs Tkm 4.184 2.5Km In Bridge Workshop At Jalandhar Cantt & 1.684 Km In Yard Lines Of Ceu Yard In The Section Of Sse/P.Way/Jrc Under Aden/Jrc - Providing and laying in position Plain cement concrete of specified Nominal Mix f o r miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level, Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item, Centering and shuttering including strutting, propping etc. and removal of form for All types of bridge sub-structures, e.g. pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level, Supply and using Cement at Worksite , Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Construction Of 50 Mtr Span Steel Superstructure Through Type Over Angro River At Km 19.585 On Anini Dembuen Road On Departmentally Constructed Abutments Under 752 Brtf Under Project Udayak In Arunachal Pradesh State

Supply Of Revet Copper Csk Hd 5X50mm Ordnance, Pin Pintle, Complete Brake Right Hand, Bellows Protection, Bushing Machine Threaded, Push Rod Hydraulic Break Master Cyl, Kit Shoe Hold Down, Pipe Assembly 3 Way To Front Lh Hose, Hp Hose Front, Adapter Tee Pipe To Hose Oblique 3 Way, Chain Welded, Spring Abutment End, Washer Spl, Complete Brake Left Hand, Lever, Clamp With Strap Assembly, Ring Retaining, D Ring, Pin Shoulder Headless 16 Mm Dia 362Mm, Spring Helical Compression, Spring Helical Compression 10Mm Mean Dia, Spring Cylinder End, Dust Cover, Kit Lining Set 1 Oblique 32 Os, Screw Machine, Bush Stabiliser, Bushing Sleeve, Liner, Seal Plain Encashed, Jacket Assy 2A26-Sb-06-Sb, Pad Cushioning, Master Cylinder Assembly, Kit For Packing Ring For Recuperator, Washer Key, Bearing Ball Thrust 80X105x19mm Widthb, Screw Locking, Packing, Bearing Needle Roller Journal 22.1X35x22, Clamp House 75 Mm, Clamp House 45 Mm, Rivet Solid, Bearing Tapered Roller, Ring Packing

Supply Of Revet Copper Csk Hd 5X50mm Ordnance, Pin Pintle, Complete Brake Right Hand, Bellows Protection, Bushing Machine Threaded, Push Rod Hydraulic Break Master Cyl, Kit Shoe Hold Down, Pipe Assembly 3 Way To Front Lh Hose, Hp Hose Front, Adapter Tee Pipe To Hose Oblique 3 Way, Chain Welded, Spring Abutment End, Washer Spl, Complete Brake Left Hand, Lever, Clamp With Strap Assembly, Ring Retaining, D Ring, Pin Shoulder Headless 16 Mm Dia 362Mm, Spring Helical Compression, Spring Helical Compression 10Mm Mean Dia, Spring Cylinder End, Dust Cover, Kit Lining Set 1 Oblique 32 Os, Screw Machine, Bush Stabiliser, Bushing Sleeve, Liner, Seal Plain Encashed, Jacket Assy 2A26-Sb-06-Sb, Pad Cushioning, Master Cylinder Assembly, Kit For Packing Ring For Recuperator, Washer Key, Bearing Ball Thrust 80X105x19mm Widthb, Screw Locking, Packing, Bearing Needle Roller Journal 22.1X35x22, Clamp House 75 Mm, Clamp House 45 Mm, Rivet Solid, Bearing Tapered Roller, Ring Packing

Supply Of Revet Copper Csk Hd 5X50mm Ordnance, Pin Pintle, Complete Brake Right Hand, Bellows Protection, Bushing Machine Threaded, Push Rod Hydraulic Break Master Cyl, Kit Shoe Hold Down, Pipe Assembly 3 Way To Front Lh Hose, Hp Hose Front, Adapter Tee Pipe To Hose Oblique 3 Way, Chain Welded, Spring Abutment End, Washer Spl, Complete Brake Left Hand, Lever, Clamp With Strap Assembly, Ring Retaining, D Ring, Pin Shoulder Headless 16 Mm Dia 362Mm, Spring Helical Compression, Spring Helical Compression 10Mm Mean Dia, Spring Cylinder End, Dust Cover, Kit Lining Set 1 Oblique 32 Os, Screw Machine, Bush Stabiliser, Bushing Sleeve, Liner, Seal Plain Encashed, Jacket Assy 2A26-Sb-06-Sb, Pad Cushioning, Master Cylinder Assembly, Kit For Packing Ring For Recuperator, Washer Key, Bearing Ball Thrust 80X105x19mm Widthb, Screw Locking, Packing, Bearing Needle Roller Journal 22.1X35x22, Clamp House 75 Mm, Clamp House 45 Mm, Rivet Solid, Bearing Tapered Roller, Ring Packing

Supply Of N1 Drg-No-Pa-948559 Bush Establisher, N1 5120- 423055 Wrench Key Socket Head, N1 5120-423054 Wrench Key Socket Head, N1 4730-002942-N1- 64477358 Adapter Straight Pipe To Hose 3Way, N1 64021733A Complete Brake Left Hand, N1 64671073 Dust Cover, N1 64474627 Gasket Hose, N1 64676028 Gasket Plug Reservoir, N1 64047816-B1-64047816 Hp Hose Front, N1 64967133 Kit Value End Seat, N1 64068422 Master Cylinder Assy, N1 64120246 Nut Union Hose, N1 64675384 Push Rod Cyl, N1 64140339 Shock Proof Washer, N1 64671544 Spring, N1 64377716 Spring Abutment End, N1 64378209 Spring Cylinder End, N1 64674498 Spring Assembly, Ina0404 Bolt, N1 Ina-0387 Circlip, N1 Ina-0395 Circlip, N1 Ina-0384 Emergency Piston Returning Spring No 4 Dia 3 20Inch, N1 Ina-0415 Filter, N1 Ina-0416 Gasket, N1 4720-003007 Hose, N1 Ina-0380 Non Return Valve Assy, N1 Ina-0397 Nylock Nut, N1 Ina-0423 O Ring, N1 Ina-0425 O Ring, N1 Ina-0421 O Ring, N1 Ina-0418 O Ring, N1 Ina-0419 O Ring, N1 Ina-0381 Screw, N1 Ina0399 Shim, N1 Ina-0385 Shims, N1 Ina-0396 Spring, N1 Ina-0390 Spring, N1 Ina-0403 Spring Washer, N1 Ina0402 Top Cover, N1 Ina-0400 Value Stem, N1 Ina-0398 Valve

Construction Of Sub Structure Abutments As Per Drawings For 200 Feet Single Lane Modular Galvanized Steel Bridge At Km 85.130 On Gangtok Chungthang Road As Per Approved Bridge Scheme And Drawings By Executing All Items Of Works Required For Launchin

Supply of Dental Implant, 136 Dental Implants Standard Abutment With Screw Castable Abutment With Screw Angled Abutment With Screw Multi- Unit Abutment With Screw Gingival Former Closed Tray Impression Coping Open Tray Impression Coping Implant Analogue Scan Body Surgical Kit

Supply of Abutment Ring As Per Clw Specification No.Clw/Ms/3/003 Alt 3 And Clw Drawing No.1209-01-3 11-013 Alt.1 For Wag9/Wap7 Locos. Warranty Period: 30 Months After The Date Of Delivery